21) Speed Up Detailed View in Explorer If you like to view your files in Windows Explorer using the "Details" view here is a tweak to speed up the listing of file attributes:
Viewing files in Windows Explorer using the "Details" mode shows various attributes associated with each file shown. Some of these must be retrieved from the individual files when you click on the directory for viewing. For a directory with numerous and relatively large files (such as a folder in which one stores media, eg: *.mp3's, *.avi's etc.), Windows Explorer lags as it reads through each one. Here's how to disable viewing of unwanted attributes and speed up file browsing:
- Open Windows Explorer.
- Navigate to the folder which you wish to optimize.
- In "Details" mode right-click the bar at the top which displays the names of the attribute columns.
- Uncheck any that are unwanted/unneeded.
- Explorer will apply your preferences immediately, and longs lists of unnecessary attributes will not be displayed.
- Likewise, one may choose to display any information which is regarded as needed, getting more out of Explorer.
22) Remove Hibernation FileIf you do not use hibernation, make sure you do not have it enabled, which reserves disk space equal to your RAM. If you have a hidden file on the root directory of your C-drive called hiberfil.sys, hibernation is enabled. To remove that file:
Go to Control Panel, select Performance and Maintenance, Power Options, Hibernate tab, and uncheck the Enable hibernation box.
23) Change Drive Letters in Windows XPWhen you add drives to your computer, such as an extra hard drive, a CD drive, or a storage device that corresponds to a drive, Windows automatically assigns letters to the drives. However, this assignment might not suit your system; for example, you might have mapped a network drive to the same letter that Windows assigns to a new drive. When you want to change drive letters, follow these steps:
- Right-click My Computer, and then click Manage.
- Under Computer Management, click Disk Management. In the right pane, you’ll see your drives listed. CD-ROM drives are listed at the bottom of the pane.
- Right-click the drive or device you want to change, and then click Change Drive Letter and Paths.
- Click Change, click Assign the following drive letter, click the drive letter you want to assign, and then click OK.
24) Do Not Highlight Newly Installed ProgramsTired of that annoying little window that pops up to tell you that new software is installed? If it gets in the way when you’re logging off, turn it off completely. To do this:
- Click Start, right-click at the top of the Start menu where your name is displayed, and then click Properties.
- In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click Customize.
- Click the Advanced tab, and then clear the Highlight newly installed programs check box.
- Click OK, and then click OK again.
25) Change the Default Opening Folder in Windows ExplorerBy default, Windows Explorer opens showing the My Documents folder. To change the default setting so that all top–level drives and folders are shown, follow these steps:
- Click Start > Programs > Accessories, then right–click Windows Explorer, and click Properties.
- Under Target field, which reads %SystemRoot%\explorer.exe, add to make the line read:
- %SystemRoot%\explorer.exe /n, /e, /select, C:\
- Click OK.
26) Shutdown Button on Desktop
Right click on ur Desktop and create new Shortcut and type “C:\WINDOWS\SYSTEM32\Shutdown.exe –s” without quotes in the popup box which will appear asking for a path of shortcut . Now when u will double click this shortcut it will give u shutdown message and ur computer will shutdown after some seconds. U can customize ur shutdown button with same icon which original shutdown have Just go to the properties of ur shortcut and click change icon tab select any icon u like and click apply.
- Similarly u can also put restart button on ur desktop just replace –s in above line by –r
- If u don’t want shutdown button on ur desktop u can the go to start >run and type
- Shutdown –s or –r they will do the same job. If someone tries to shutdown u remotely on the net then u can stop shutdown process but typing shutdown –a in Run.
- Shutdown –s = Shutdown & restart
- Shutdown –r = Restart
- Shutdown –a = To abort shutdown
27) Cracking windows xp admin and user passwords. I hope u guys liked tip given for resetting passwords in first part. If u have guest or limited user account on PC than that control userpasswords2 tip does not help u much. Windows will still ask u admin password for resetting users passwords .
Ok go and Download a tool called CIA COMMANDER this is just what we want. This tool will create a copy protected bootable floppy which will allow u to boot any computer and also help u to get into any NTFS partition .First select floppy as first bootable device from BIOS. CIA shows u every thing to u in GUI.
After booting CIA will allow u to reset any user password even administrator’s password. It also includes a file manager, registry editor and a text/hex editor. Present version of CIA does not support FAT partitions but sooner its new version will even support FAT partition based system.
I have read on some tutorials about a tool called NTFS Pro which looks almost like CIA .
28) Correcting System Hang at Startup
- If your system hangs about 2 or 3 minutes at startup, where you can't access the Start
- button or theTaskbar, it may be due to one specific service (Background Intelligent
- Transfer) running in the background. Microsoft put out a patch for this but it didn't
- work for me. Here's what you do
- Click on Start/Run, type 'msconfig', then click 'OK'.
- Go to the 'Services' tab, find the 'Background Intelligent Transfer' service.
- Disable it, apply the changes & reboot.
29) Editing explorer in windows xpEditing explore in windows xp is very easy with available tools its not as difficult like old dos based tedious method here u need just one tool called RESOURCE HACKER
It is a resource viewer it will show u Resources in any 32bit Windows 95/98/ME/NT/2000 executable files (including exe’s, dll’s, ocx’s and cpl’s) . ok go in to ur windows directory and find explorer.exe and make its two copies name them
As explorer_1 and explorer_2 .exe respectively and keep them in windows folder only. We will edit explorer_1 and will keep explorer_2 as backup copy if anything goes wrong. Open explorer_1.exe in resource hacker and go to String table and edit whatever u want to even u can change start button by ur name or anything else
After editing even a single word do not forget to click the COMPILE button. Change icon or u can change animated message such as when u install a new programs so when u go to all programs a animated message comes “New Program Installed” u can change it by ur sentence etc. now we have edited the explore_1 now go To File menu in Resource hacker and save it as explorer_1.exe it will ask u that explorer_1.exe is already present do u want to replace it, click YES. Now we have our edited explorer.
Now restart ur computer in safe mode with command prompt by pressing F8 during booting process . Now we will copy explorer_1.exe on explorer.exe by typing command Copy C:\windows\explorer_1.exe C:\windows\explorer.exe
Now restart ur computer and what u will seeing that u r working with ur edited explorer. If anything goes wrong than just copy explorer_2.exe on explorer.exe by same process.
30) Identify a 16-bit ProgramUse Windows Explorer to open the folder that contains the program's executable (.exe) file.
- Right-click the .exe file, and then click Properties.
- A 16-bit program does not have a Version tab in this dialog box.
Post a Comment